一种改进的基于人体静电冲击模型应力的瞬态功率模型

提出一种改进的基于人体静电冲击模型(Human Body Model, HBM)应力的瞬态功率模型。利用HSPICE仿真软件, 模拟MOS管遭受的HBM应力, 得到对应的等效直流电压。HBM电路的预充电电压与MOS管对应的等效直流电压值的散点图表明, 两者保持线性关系, 并通过拉普拉斯变化得到证明。与现有的瞬态功率模型相比, 改进后的模型降低了在HBM应力作用下的计算复杂度, 可以更加简便地从统计学上预测MOS管栅氧击穿的发生, 给HBM冲击作用下MOS管栅氧化层可靠性的评估提供参考。     

目标边缘特征增强检测算法

针对分组角点检测网络在目标检测过程中,由于目标尺寸过小或同类目标空间距离较小而导致检测失效的问题,提出一种边缘特征增强的CornerNet目标检测算法OEC。该算法通过分离特征的高低频信息提取更多的高频信息,增强目标的边缘轮廓特征,解决关键点定位不准确的问题,提高目标的框定效果,进一步提升检测精度。仿真结果表明,该算法对行人、车辆等目标检测效果均有提高,在COCO数据集上的检测结果与CornerNet相比,mAP提高0.9%,可应用于无人驾驶与智能机器人等场景。     

Comparison of Travel Mode Choice Between Taxi and Subway Regarding Traveling Convenience

In this study, we investigate travel mode choice behavior between taxi and subway with an emphasis on the influence of traveling convenience. In the first stage, we examine the Origin-Destination(OD) points of Beijing taxi trips and compare these locations with the respective nearest subway station. Statistics reveal several interesting conclusions. First, for approximately 24.89% of all trips, no convenient subway connections exist between the OD pairs. As such, a taxi becomes the only viable choice. Second, for 80.23% of the remaining 75.11%of trips(equivalent to 60.26% of all trips), access distance from either the origin or the destination to the nearest subway station is greater than 500 meters. This phenomenon indicates that walking distance plays an important role in travel mode choice. In the second stage, we examine groups of taxi trips with similar travel distances and travel times to reveal common features. We establish a preference rule in terms of travel distance and travel time.This determines whether an individual driver will take a taxi or the subway, using a pairwise comparison-based preference regression model. Tests indicate that more than 95% of taxi trips can be correctly predicted by this preference rule. This conclusion reveals that traveling convenience dominates the travel model choice between taxi and subway. All these findings shed light on the factors that influence travel mode choice behavior.     

Uncoupled PID Control of Coupled Multi-Agent Nonlinear Uncertain systems

In this paper, PID (proportional-integral-derivative) controllers will be designed to solve the tracking problem for a class of coupled multi-agent systems, where each agent is described by a second-order high-dimensional nonlinear uncertain dynamical system, which only has access to its own tracking error information and does not need to communicate with others. This paper will show that a 3-dimensional manifold can be constructed based on the information about the Lipschitz constants of the system nonlinear dynamics, such that whenever the three parameters of each PID controller are chosen from the manifold, the whole multi-agent system can be stabilized globally and the tracking error of each agent approaches to zero asymptotically. For a class of coupled first-order multi-agent nonlinear uncertain systems, a PI controller will be designed to stabilize the whole system.     

非物质文化遗产协同创新保护体系探究——以丹寨万达小镇为例

以丹寨万达小镇为切入点,分析它的特色之处,引出非物质文化遗产是其内核。阐述非物质文化遗产协同创新保护体系的构成,探索协同创新保护体系运营模式,指出非物质文化遗产协同创新保护之路任重而道远。     

TiOF2光催化降解甲基橙的影响因素研究

通过溶胶-凝胶法制备氟氧钛（TiOF₂）花状纳米球，采用X射线粉末衍射仪（XRD）、扫描电子显微镜（SEM）、傅里叶红外光谱分析仪（FT-IR）和固体紫外漫反射仪（UV-Vis DRS）等手段对TiOF₂花状纳米球进行表征分析，并通过实验探究了不同条件下TiOF₂对甲基橙染料废水的光催化降解性能。在300 W氙灯模拟太阳光照射2.5 h条件下，质量浓度0.5 g/L TiOF₂光催化剂对初始质量浓度20 mg/L、pH呈中性、体积为100 mL的甲基橙染料废水在20 ℃反应条件下降解效果最佳，催化降解率可达97.3%。此结果说明所制备的TiOF₂光催化剂对甲基橙染料废水具有良好的光催化活性。     

Cost and Service-Level-Based Model for a Seru Production System Formation Problem with Uncertain Demand

With increasing demand diversification and short product lifecycles, industries now encounter challenges of demand uncertainty. The Japanese seru production system has received increased attention owing to its high efficiency and flexibility. In this paper, the problem of seru production system formation under uncertain demand is researched. A multi-objective optimization model for a seru production system formation problem is developed to minimize the cost and maximize the service level of the system. The purpose of this paper is to formulate a robust production system that can respond efficiently to the stochastic demand. Sample average approximation (SAA) is used to approximate the expected objective of the stochastic programming. The non-dominated sorting genetic algorithm II (NSGA-II) is improved to solve the multi-objective optimization model. Numerical experiments are conducted to test the tradeoff between cost and service level, and how the performance of the seru production system varies with the number of product types, mean and deviation of product volume, and skill-level-based cost.